REQUEST A FREE SAMPLE

This is a visual representation of material colour. Please order a FREE sample to ensure colour is correct.

Samples will be posted to you within 2 working days.

Horizon Pewter Allusion Blind

FROM £72.29

Horizon Pewter Allusion Blind

  • Louvolite Vogue Head rail (for cassette options call customer service)
  • Wand controlled operation to open, close and tilt slats 
  • 100% child safe
  • Top or face fix brackets
  • No screws included
  • Textured fabric allows both light and privacy.
  • Ideal for large openings/bi-fold doors
  • Easy access between slats
  • Fully made to measure in our UK based factory
  • Max width 4800mm, Max drop 3000mm
  • Min width 400mm, Min drop 400mm

ALLUSION™ WAND
fitting instructions

Carefully unwrap the Allusion blind and its associated brackets. There are a number of bracket options for example face fix, top fix screw or topfix spring.

 

Allusion brackets

FITTING THE BRACKETS
The brackets should be located to allow for the depth of the louvres on the blind to tilt. The brackets should therefore be attached to the ceiling or window frame clear from any obstruction and in line with each other.
For a blind up to 900mm wide attach two brackets fitted approximately 40mm (1½”) from each end of the blind. On wider blinds any intermediate brackets should be spaced evenly between these, and as a general rule dependant on how well the brackets are fitted, use the following as a guide:

Up to 900mm = 2 brackets.

900mm to 1600mm = 3 brackets.

1600mm to 2300mm = 4 brackets.

2300mm to 3000mm = 5 brackets.

3000mm to 3700mm = 6 brackets

Mark the bracket hole positions before drilling and plugging if necessary. Use two screws for a face fix bracket and one screw in a top fix bracket ensuring that the brackets are level. Remember to allow room for the blind to clear any obstacles
when deployed, e.g. door or window handles.

FITTING THE TRACK
The track should be fitted into the brackets keeping the operating wand on the side of the blind as ordered (LH/RH control). If using a face fix screw bracket, locate the blind with the groove on the back of the headrail and fit it into the middle lip of the bracket. Now push the blind upwards until the headrail is sitting level on the bracket before tightening the securing screw from the front of the blind. Do not over tighten these screws, it is unnecessary and may damage the track.

Head Rail

If using a top fix spring clip bracket you should push the track upwards then tilt away from you to locate the spring bracket front lip into the front groove on the track. Push upwards and the track will click into place.

 

Top fix

FITTING THE LOUVRES
Turn the hooks on the carriers of the track so that the slots are at 90 degrees to the track. Attach a holed insert to the non holed insert on the fabric and hang this onto the end carrier.

 

Louvres

Then fit the other half of the louvre to the next carrier. Take the next louvre and snap fix the non hole insert to the holed insert on the track, repeat until you get to the last carrier/louvre. When you get to the last louvre snap fix a non holed
insert to the end louvre and fasten to the track. If the blind has a split draw then repeat for the other side of the blind ensuring the seams are all facing the same direction.

 

louvres2

 

OPERATING THE BLIND
The wand system has a single wand which is used for both operations. To traverse the louvres across the track grip the wand and slide the louvres across the track by walking the wand across the blind. To move the louvres in the opposite direction walk the wand in that direction. To rotate the louvres grip the wand and twist the wand to rotate the louvres. To rotate the louvres in the opposite direction reverse the direction of twist on the wand. Note: Do not traverse the blinds with the louvres in the closed position always twist them 90 degrees to the track before operating.


We do everything we can to make sure your chosen product is safe for your child. As a minimum, all of our blinds meet the European Standard BS EN 13120 for both performance and safety.

Beyond this, safety is at the forefront of our minds right through the design process as we strive to make products that are not only stylish and high-quality, but also safe.

BBSA Make it Safe from BBSA on Vimeo.

Please Note: We can only issue you with an estimated delivery date but aim to despatch our orders within 5 workings days from the time of purchase.

In addition to the product price, there will be a delivery charge of £7.96 to locations within mainland UK. The delivery charge will be shown on the order confirmation prior to completion of your order. Deliveries to Northern Ireland, the Channel Islands, Isle of Man, Isle of Wight and the Scottish Isles may be subject to an additional delivery charge. For further information, please see our delivery page.

REQUEST A FREE SAMPLE

Please order a FREE sample to ensure colour is correct. Samples will be posted to you within 2 working days.

LOWEST PRICE GUARANTEE
MADE TO FIT LUXURY BLINDS

Blinds made to your exact specification


FAST DELIVERY
FAST DELIVERY

As a standard, all blinds are sent within 3-5 days


MADE IN THE UK
MADE IN THE UK

Our blinds are made in our UK factory

BEST CHOICE

BEST SELLERS

reviews 055
OUR CUSTOMERS SAY

REVIEWS

Thumbs Up

EXCELLENT

4.83 AVERAGE

6 REVIEWS

MADE TO FIT LUXURY BLINDS FOR YOUR HOME OR WORKPLACE.